AJS Motorcycles Ltd. Exhaust & Muffler

TAIL PIPE - 35mm DIA (1 3/8") Ref: T-PIPE-1
TAIL PIPE SECTION. 35mm DIA. x 200mm LONG
ERW MILD STEEL
FITS OUR STEALTH MUFFLERS
Price: £2.10 (£2.52 Including VAT at 20%)

U- BEND FRONT PIPE (2) Ref: BEND2
2" OD U-Bend.
3.25" centre line radius.
1.2mm thick. CRW tube.
Use this bend to fabricate 2 stroke front pipes etc.
Price: £16.53 (£19.84 Including VAT at 20%)

U- BEND FRONT PIPE (1) Ref: BEND1
2" OD U-Bend.
5" centre line radius.
1.2mm thick. CRW tube.
Use this bend to fabricate 2 stroke front pipes etc.

Price: £16.53 (£19.84 Including VAT at 20%)

EXHAUST PACKING WOOL Ref: 0700047
Ceramic wool.
Sufficient to repack your muffler.
200g per bag.
Price: £5.32 (£6.38 Including VAT at 20%)

STRAIGHT THRO' MUFFLER Ref: 0700049
Steel 'BOMB' muffler. 1 3/8" (35mm) fitting. 35mm straight through perforated baffle tube.
Two 5/16" UNC mounting points. Finished in matt black heat resistant paint.

Price: £29.40 (£35.28 Including VAT at 20%)

Related products:

1. EXHAUST CLAMP (1) (Ref: EXC1)

EXHAUST SPRING (1) Ref: EXS1
Exhaust Tension Spring. 65mm end to end.
Price: £1.74 (£2.09 Including VAT at 20%)

EXHAUST SPRING (2) Ref: EXS2
Exhaust Tension Spring. 85mm end to end.
Price: £1.74 (£2.09 Including VAT at 20%)

EXHAUST SPRING (3) Ref: EXS3
Exhaust Tension Spring. 55mm end to end.
Price: £1.74 (£2.09 Including VAT at 20%)

EXHAUST CLAMP (1) Ref: EXC1
Stainless steel adjustable exhaust/muffler clamp.
Hex head adjuster screw.
Price: £2.90 (£3.48 Including VAT at 20%)

Choose Size

EXHAUST MOUNTING (1) Ref: NM060622
Flexible rubber exhaust mounting. 5 /16" UNF male x 5 /16" UNF male.
Price: £3.15 (£3.78 Including VAT at 20%)

EXHAUST MOUNTING (2) Ref: 2620
A soft flexible rubber exhaust mount.
M8 male x M8 female.
Price: £4.05 (£4.86 Including VAT at 20%)

2 STROKE EXHAUST KIT Ref: EX1
Two Stroke Exhaust Kit. Hand cut rolled & welded in the UK! All you need to fabricate your own classic 2 stroke expansion chamber. Suitable for 250cc - 410cc. As used on our own Cotton replicas.
Each kit consits of:
1) Front bend. 2" Diameter.
2) Front cone.
3) Centre section.
4) rear cone.
5) Tail pipe (35mm OD ready to accept our STEALTH muffler).
All sections are seam welded. You just need to angle the sections and hold together with masking tape until you are ready to tack and weld.
Price: £118.00 (£141.60 Including VAT at 20%)

Related products:

1. ALLOY MUFFLER (Ref: STEALTH1)

2. EXHAUST MOUNTING (2) (Ref: 2620)

3. ENGINE SPRAY PAINT (Ref: PJ1-S)

4. EXHAUST SPRING (1) (Ref: EXS1)

Best Sellers