AJS Motorcycles Ltd. SILKOLENE OILS & FUEL ADDITIVES

IMPORTANT INFORMATION ABOUT ORDERING OILS
There is a minimum delivery charge for oil. You may be able to reduce your unit carriage cost by ordering two or more items of oil, or other products, to be shipped simultaneously.

Comp 2 Pre-mix (1L) Ref: 600362225
Synthetic ester based 2-Stroke engine oil, with Electrosyntec Technology, for competition off road motorcycles. Contains a unique, ash-less, synthetic blend for motocross, enduro and trials machines that require a tank mix oil. Ideal for use in engines that are used seasonally or infrequently. Leaves a coating on all internal surfaces to prevent corrosion. Its additive system and high ester content ensure clean burning and freedom from plug fouling, from low speed to full throttle.

Specifications
API -TC
JASO FB

Price: £8.28 (£9.73 Including VAT at 17.5%)

Related products:

1. Pro Boost (1L) (Ref: 800002426)

Casterene R40 (1L) Ref: 600130763
Castor based blend incorporating synthetic lubricants and additives for enhanced lubricating qualities. Minimises the risk of thickening or lacquer formation. Can be used for both 4-stroke and 2-stroke engines. Methanol and petrol compatible.
AJS reccomends this oil for air cooled, classic racing two strokes that have a bushed small end bearing.
Has the great smell of Castrol R
Price: £7.99 (£9.39 Including VAT at 17.5%)

Related products:

1. Casterene R40 (5L) (Ref: 600020439)

2. Pro Boost (1L) (Ref: 800002426)

Comp 2 Injector (1L) Ref: 600362362
Synthetic ester based 2-stroke engine oil, with Electrosyntec Technology, for high performance motorcycles. Advanced, low smoke formula reduces engine wear, provides outstanding reliability and combats piston seizure, ring sticking, plug fouling and carbon build-up. Ideal for all modern sports and off road 2-stroke power units, ensuring maximum performance and reliability. Can also be used as a premix in trials and road machines and is particularly recommended for cold weather use, or where a lower viscosity oil is required.

Specifications
API TC
JASO FC & FD
ISO-L-EGD

Price: £7.58 (£8.91 Including VAT at 17.5%)

Super 2 Injector (1L) Ref: 600362348
Semi-synthetic, light viscosity 2-stroke engine oil, with MC-Syn Technology, for motorcycles. Has a clean burning formula that resists carbon build-up, ring sticking, plug fouling and pre-ignition. Contains special friction reducing synthetics to give maximum power output with minimum smoke and low piston and exhaust port deposits. For use in both premix and auto-lube injector systems.

Specifications
API 2-Cycle Performance Spec. TC
JASO FB

Price: £6.03 (£7.09 Including VAT at 17.5%)

Pro RSF 5 (1L) Ref: 600130848
Advanced racing suspension fluids designed for the latest competition suspension systems. Integrated with low friction synthetics, anti-foam and wear-resistant additives to ensure predictable suspension performance, long seal life and silky smooth action. Used extensively by factory teams and suspension specialists in road racing and rallying competition. Provides exceptional performance in air, nitrogen and argon filled systems. Has a high viscosity index (VI), which eliminates the 'fade' experienced when shocks are required to operate at high temperatures. Available in 2.5wt, 5wt, 7.5wt, 10wt, 15wt grades, which can be individually blended to give fine-tuned suspension response.

Price: £9.15 (£10.75 Including VAT at 17.5%)

Pro RSF 15 (1L) Ref: 600130992
Advanced racing suspension fluids designed for the latest competition suspension systems. Integrated with low friction synthetics, anti-foam and wear-resistant additives to ensure predictable suspension performance, long seal life and silky smooth action. Used extensively by factory teams and suspension specialists in road racing and rallying competition. Provides exceptional performance in air, nitrogen and argon filled systems. Has a high viscosity index (VI), which eliminates the 'fade' experienced when shocks are required to operate at high temperatures. Available in 2.5wt, 5wt, 7.5wt, 10wt, 15wt grades, which can be individually blended to give fine-tuned suspension response.

AJS say "you will feel the difference compared to regular mineral fork oil. Regular oil will foam causing PATTER and front wheel WASH out on fast, hard packed corners.Pro RSF is the expert racer's choice. Use Pro RSF 15 to replace regular 20w fork oil in classic bikes"
Price: £9.15 (£10.75 Including VAT at 17.5%)

Chain Lube (600ml) Ref: 600129842
For all motorcycle and ATV chains. Penetrates to inner rollers and pins. Resists high speed fling off. Also suitable for "O" ring chains.
AJS Tip: Also use for lubricating footrest pivots, control lever pivots and other moving parts
Price: £9.21 (£10.82 Including VAT at 17.5%)

Foam Filter Oil (1L Ref: 800002471
Advanced, low viscosity coating treatment designed to improve the efficiency of foam air filters. Contains polymeric additives to provide a hyper-tacky surface that resists the ingress of the most pervasive sand, dust and water, without affecting engine breathing. Developed to provide outstanding engine protection even in the most severe conditions. Reduces the risk of breakdown and helps extend engine life. The chlorinated solvent-free formula will not damage the foam filter construction or air box materials.

Specifications
Independently tested at MIRA

AJS Tip: Keep a spare oiled filter in a plastic bag with your spares kit. Change air filters between dusty races.

Price: £9.09 (£10.68 Including VAT at 17.5%)

Casterene R40 (5L) Ref: 600020439
Castor based blend incorporating synthetic lubricants and additives for enhanced lubricating qualities. Minimises the risk of thickening or lacquer formation. Can be used for both 4-stroke and 2-stroke engines. Methanol and petrol compatible.

AJS reccomends this oil for air cooled, classic racing two strokes that have a bushed small end bearing.
Has the great smell of Castrol R
Price: £37.65 (£44.24 Including VAT at 17.5%)

Related products:

1. Pro Boost (1L) (Ref: 800002426)

Chatsworth 30 (5L) Ref: 600011093
Monograde engine oils, manufactured from a blend of selected high quality base oils and additives, suitable for vehicles circa 1950 - 1960. Designed to provide detergent / dispersant properties for improved engine cleanliness and reduced wear.

Specifications
U.S. Military MIL-L-2104B
API SD/CC
Ford M2C-101B

Price: £24.74 (£29.07 Including VAT at 17.5%)

Osmaston 50 (5L) Ref: 600010812
High quality, premium grade, non-detergent engine oil for pre-war vehicles.

Ideal for total loss lubrication systems used in the engines of early cars and motorcycles. May also be used in certain gearboxes.

Price: £25.65 (£30.14 Including VAT at 17.5%)

Pro Boost (1L) Ref: 800002426
High performance, efficient octane improver designed to combat pre-ignition - often called 'pinking' or 'knocking'.
Improves acceleration and lowers fuel system corrosion.
More information...
Price: £11.81 (£13.88 Including VAT at 17.5%)

Light Gear Oil (1L) Ref: 600130787
Advanced specification gear and transmission fluids formulated for use in high performance competition and road motorcycles. Contains surface-active, extreme pressure components that protect transmission parts, even under severe shock load conditions. Offers outstanding long life wear resistance, reduces viscous drag and friction and ensures smooth, slick gear changes.

LIGHT GEAR OIL - SAE 10W-40 (Crankcase), SAE 75W or SAE 80W (Gearbox)

Specifications
GL-3, GL-4 for motorcycle applications only

Price: £6.33 (£7.44 Including VAT at 17.5%)

Medium Gear Oil (1L) Ref: 600130800
Advanced specification gear and transmission fluids formulated for use in high performance competition and road motorcycles. Contains surface-active, extreme pressure components that protect transmission parts, even under severe shock load conditions. Offers outstanding long life wear resistance, reduces viscous drag and friction and ensures smooth, slick gear changes.

MEDIUM GEAR OIL - SAE 20W-50 (Crankcase), SAE 85W or SAE 90 (Gearbox)

Specifications
GL-3, GL-4 for motorcycle applications only

Price: £6.33 (£7.44 Including VAT at 17.5%)

Carb Cleaner (400ml) Ref: 800018717
A selected blend of solvents designed to remove gum and resin build-up from carburettors, fuel injection systems and automatic chokes. Allows smoother operation and improved engine efficiency. Also suitable for cleaning throttle linkages and carburettor bodies.
Price: £6.50 (£7.64 Including VAT at 17.5%)

Pro Prep (400ml) Ref: 800018748
High quality, hard surface conditioner especially formulated for motorcycles and performance cars. Restores the colour and finish of plastics and painted surfaces, making subsequent cleaning easier. Retards metal corrosion and inhibits the further adhesion of dirt and mud. Gives that elusive "factory finish" and also ensures smooth operation of plastic moving parts. Helps to waterproof and insulate ignition systems.

AJS Tip: Apply before you compete in a muddy event to help later ease off the mud.
Price: £6.63 (£7.79 Including VAT at 17.5%)

Best Sellers