Product Description
HT coil to suit magneto points ignition.
Bosch type.
Important Installation Notes:
Terminal (15) to points.
Terminal (1) to earth.
Fits all Stormer and Starmaker models. (unless fitted with electronic ignition)
Coil Primary resistance readings. Across Positive and Negative terminals 0.4 - 2 Ohms.
Secondary resistance readings measure across HT output and Negative, 3 - 12,500 Ohms.
Additional diognostics:'
With the plug and plug cap removed, hold the bare end of the HT wire close to the cylinder and kick the engine over. You should see a blue spark not less than 6mm long. Less than 6mm or an orange spark means an insufficient spark.
