Blank cylinder liner for the 370/410 Stormer.
Made by Hepolite from from austenetic cast iron.
Replaces a worn out 370/410 liner.
Needs boring out to 83mm standard.
Overall length: 140mm
Flange OD: 95.3mm
Flange thickness: 3.2mm
Body OD: 91.4
(Measured with a digital caliper)
To remove the old liner heat the cylinder in an oven until smoking hot (200c)
whilst still hot drop the clean, cold new liner in.
Do not attempt to press it out or in using a press. It will break!